Y2K FLUID POWER

By-Pass Valve. Open and allow dirty oil to go around filters rather than through them. Both Sample Ports and Bypass valves or other combinations of options.

GFCI Plugs. Hard wired to the cord or a removable plug that has both a male & female side.

Hose Reel A retractable 1/2" outlet hose reel makes hard to reach places simpler.

In-Line Particle Counter. On most units we can install this valuable resource to keep track of oil cleanliness.

Magnetic Filters are an excellent way to augment the filtration of ferrous metals.  Easy to use and re-useable.

Option #5 Colors. All of our filter carts and breather adapters can be color coded to virtually any color. This helps reduce cross-contamination

OIL SAMPLING KIT
This kit includes a vacuum pump, 20ft of tubing, a female sample coupling and push to connect fittings. Oil samples can be taken through test ports or by inserting the tubing into the port.

MALE OIL SAMPLE PORT
1/4" Male NPT oil sample ports make the task of drawing oil samples easier & better. They can be installed into gauge ports on filters, drain plugs and other areas on equipment.

FEMALE OIL SAMPLE HALF request. 1/4" Female NPT oil sample ports are the mating halves of the oil test ports above.

DRUM LEVEL GAUGE
Without a gauge, how do you know the oil level in the drum? Our Drum Level Gauge fits in the 3/4" port on drums. It is included in our DB-1004-3 Kit also.

24" PVC HOSE WAND KIT
None of us like to use hose wands, but some applications may require them. They can also be used short term, while quick disconnects are being added to equipment. Also available in Stainless steel

# Model 122 with 3 color dial. An optional maximum indication follower pointer provides automatic indication of maximum differential occurring during a time period or system cycle. Reversed pressure ports are optionally available to facilitate installation and readability.

122 Aluminum ±5% 0-5 PSID (0-0.35 bar) 0-110 PSID (0-7 bar) 5,000 (340) 1 & 2 switch

Hermetically Sealed

MALE QD & #S19-4 DUST CAP
1/2" male quick disconnects & dust caps are the size we use to pump oils into equipment & machinery. The dust cap and chain are made of carbon  steel.

MALE QD & #S19-6 DUST CAP
3/4" male quick disconnects & dust caps are used to pump oils out of equipment, like drain on plugs of gear-boxes. The dust cap keeps the connection clean, when not in use.

FEMALE QD & S14-4 DUST PLUG
1/2" Female quick disconnects and dust plugs come standard on most of our products. This is normally attached to the 1/2" outlet hose on our filter carts.

FEMALE Q.D.
3/4" Female quick disconnects and dust plugs also come standard on most products. The 3/4" is used on suction lines. The use of 2 different sizes reduces improper connecting of hoses.


OUTLET HOSE EXTENSION 10FT
This hose couples up to the outlet hose on our filter carts, for harder to reach areas. The quick disconnects keep the oil in the hose, rather than the floor, when not in use.

OUTLET HOSE EXTENSION 25FT
Same as above, except 25Ft. Over-all length, special and custom sizes are also available upon request

SEVEN FT. HOSE EXTENSION KIT
Generally it’s not recommended to have a suction hose longer than 7ft., but there are applications that require the intermittent use of longer hoses, these too have quick disconnects