Magnetic Filtration
Is not a new technology, magnets have been used in nearly every industry from farming to mining for hundreds of years. However, advances in the power of Neodyimum (Permanent Rare Earth) Magnets has allowed us to design and manufacture more powerful and more effective magnetic filters.
Conventional filters only capture a percentage of specifically size particles, they allow the very small and minute (fractional) sized contamination to pass freely through the filters. That's why magnetic filtration is so popular and so effective. Magnets don't capture specific sized particles, they attract all sizes. They are inexpensive, reusable, and most importantly very efficient.
We have high powered magnetic plugs, magnetic sticks (for sticking to spin on filters and oil reservoirs), magnetic filters and more. See our catalog below.
|
| MAGNETIC STICKS Attach these to the side of a spin on filter, reservoir, transmission pan or even a steel fluid line and watch what they accumulate. Available in three sizes 3", 5" and 7". These have more power than any other magnetic product in their class!
|
|
| Magnetic Filters One inlet port and one outlet port, oil must pass by the high powered "cleanable" magnetic rod. These magnetic filters are simple to use, inexpensive and very simple to service.
|
 |
| Click on Picture to Open Catalog |
|
|
For those who are skeptical of Magnetic Filtration, here's some pictures of real-life applications & successes;
|
|
|
2007 Chevy Silverado Transmission5000 miles with a #DFPMS7 Magnetic Stick.
|
|
| Here's a Magnetic Rod out of a Magnetic Filter, easy to see the contamination it removes and easy to clean & re-use again and again.
|
|
