| Specially Designed Products |
Y2K FLUID POWER manufactures "in-house". This allows us the ability to manufacture custom products and even manufacture one-of-a-kind products without the excessive costs or time delays. Below are just a couple examples of our fabricating projects.
|
 |
| Click on picture to enlarge |
|
| This special Portable Tote has two 30 gallon reservoirs, three pumps and motors and special hoses for draining and filling vacuum pumps.
|
|
| These 50GPM carts were built with 20HP Motors and 6um filters. The largest we have built, so far........
|
|
| Styled after our #Y2K-2100-1 Hand Truck Filter Cart, this filter cart is manufactured entirely out of aluminum. All of the hoses ends, adapters, quick disconnects, nuts, bolts and washers are stainless steel and the by-pass valve is made of brass. Because of the environment this cart will be used in, the 25ft electric cord reel was replaced with a 15Ft electric cord. There is both an on/off switch and an electrical outlet box.
|
|
| This Hand Truck Style Filter Cart has a 5HP-3Phase Electric Motor and 30GPM pump. The Filters are 5" diameter spin on type, a water removal pre-filter and 10 Micron secondary filter. Both filter heads have differential visual indicators.
|
|
| This 5 gallon system (reservoir, pump, motor, filters) was built for a customer who wanted a unit that could be used for demonstrating oil sampling. There are up stream and downstream oil sample ports.
|
|
| Explosion Proof Panel Units with either single or 3 phase motors. Pictured is a single phase, 115vac motor and 5GPM gear pump with integral relief valve, explosion proof switch and conduit.
|
|
| One of our most popular filter carts is the T30 Series Totes, beacuse it can fill itself, dispense oil and it can be used as an "off-line" filter cart. This #T30-4121-5 was painted blue for a customer that color codes all of their oils & filter carts, to help deter use of a filter cart on the wrong oil type. We can paint any of our filter carts various colors and can even anodize our breather kits in different colors.
|
|
| Most of our patented breather adapters (for Drums & Hydraulic Reservoirs) are manufactured with either 1" "push to fit" ports, 3/4" & 1-1/4" female NPT threaded ports. The kit in the picture to the left was manufactured for sever duty in Iraq for our troops. The air breathers for these kits are Air Sentrys' "M-Series" steel breathers that have powder coated bodies, replaceable desiccant packs, 2 micron filter and air flow rating up to 300 cfm.
|
|
| This medium duty Hand Truck Cart is manufactured for diesel oils and is color coded for diesel fuels to reduce cross-contamination with other oils. It can be manufactured with explosive proof motors and switches for severe duty applications.
|
|
